מק"ט |
תאור |
תמונה |
עלות
יח'
בש"ח לכמות
עד
10
יח' |
ELB601 |
מגבר 15W
מונו מורכב 12V
AC/DC |
|
195 |
EL602 |
מגבר 2W
מונו
• This power
amplifier circuit is the small amplifying circuit that
suitable for sound a bout signal amplifying.
• Power supply : 3-12V.
• PCB dimensions : 1.6” X 1.4” |
|
48 |
EL603 |
מגבר 2W
+2 סטריאו
• This power
amplifier circuit is the small amplifying.
• Power supply : 3-12V.
• PCB dimensions : 2.3” X 1.9” |
|
69 |
EL604 |
מגבר 8w
מונו
• The power
amplified circuit use ic Power Amp No. TDA2030, An OTL
operation.
• Requirement 9-15 volts Power Supply.
• The multifunction amplifier can amplify the signal
from a walkman, a tuner or a cassette tape.
• Power supply : 12VDC./1A max
• PCB dimensions : 2.0” X 1.6” |
|
80 |
EL605 |
מגבר 8W
+8 סטריאו
This power amplifier 8+8
watt (STEREO) circuit is designed to have only 1 IC to
for ease the system development.
• IC NO.TDA2004 is specially selected to be used for
amplifying both left and right channels.
• This particular IC has many qualification including
protective circuits inside IC and is popularly used for
car radio for many brands.
• When it is applied as stereo amplifier, it is suitable
for listening during free time for those who has limited
budget.
• Power supply : 12VDC./1A max
• PCB dimensions : 2.9” X 2.0” |
|
104 |
EL607 |
מגבר 15W
מונו
• This power amplifier BTL
15 watt circuit is designed for using with soundabout,
cassette and car radio amplifying.
• This circuit designed for using with in the car or
home too.
• It can be applied to use only 12 volt A/C supply by
connecting circuit with adaptor.
• Power supply : 12VDC./1A.max
• PCB dimensions : 2.4” X 2.1” |
|
145 |
EL608 |
מגבר 15W
+15 סטריאו
• This power amplifier
circuit is mostly applied for soundabout, cassette and
car radio with 15+15 watt amplifying power
• This circuit designed for using in the car or house
too.
• It can be applied to use only 12 volt A/C supply by
connecting circuit with adaptor.
• Power supply : 12VDC./1A.max
• PCB dimensions : 4.8” X 1.9” |
|
248 |
EL617 |
מגבר עבור מורה
• This amplifier is
constructed with TDA 2004 IC
• Capable of delivering 15 Wrms at 4 Ohms (BTL)
• With have build-in mono tone-control and pre-amplifier
of microphone.
• Two input selection can be operated using PUSH-ON
PUSH-OFF switch.
• Power supply : 12 VDC. / Max 1A.
• PCB dimensions : 4.3” X 2.5” |
|
214 |
EL625 |
ווסת טונים מונו
• This tone control (MONO)
circuit is a multifunctional tone controller that can be
applied with normal amplifier.
• Power supply : 6-15V.
• PCB dimensions : 3.4” X 1.3” |
|
76 |
EL626 |
ווסת טונים סטריאו
• This tone control (STEREO)
circuit is a multifunctional tone controller that can be
applied with normal amplifier.
• Power supply : 6-15V.
• PCB dimensions : 4.8” X 1.4” |
|
164 |
EL627 |
סופר ווסת טונים מונו
This super tone
control (MONO) circuit requires 15-0-15 volt power
supply.
• It is suitable for connecting with OCL amplifier only.
• PCB dimensions : 3.5” X 1.3” |
|
116 |
EL628 |
סופר ווסת טונים סטריאו
• This super
tone control (STEREO) circuit requires 15-0-15 volt
power supply
• It is suitable for connecting with OCL amplifier only.
• PCB dimensions : 6.4” X 1.7” |
|
233 |
EL642 |
מגבר BASS
מונו
• This mono stereo base
increasing circuit amplifies low frequency (base sound)
while twitter is blocked from output.
• Power supply : 12V.
• PCB dimensions : 2.5” X 1.7” |
|
54 |
EL643 |
מגבר BASS
סטריאו
• This base
bosster stereo increasing circuit.
• It is amplifies low frequency (base sound) while
twitter is blocked from output.
• Power supply : 12V.
• PCB dimensions : 2.8” X 2.9” |
|
106 |
EL647 |
מגבר משתנה למיקרופון
• A basic
circuit with 2TR and a couple of other essential parts
especially designed for microphone.
• Power supply : 12V.
• PCB dimensions : 1.6” X 1.3” |
|
42 |
EL648 |
מגבר למיקרופון עם
מיקרופון קיבולי
• This circuit
is small and has only few components.
• Because this circuit has PRE-MIC and MIC condensor, it
is high sensitivity than normal circuit.
• Power supply : 6-9V.
• PCB dimensions : 1.6” X 0.9” |
|
43 |
EL649 |
מגן רמקולים מונו
• Speaker
protection (mono) circuit can be connected with OCL
amplifier in order to protect speaker.
• If the amplifier has no protection circuit, transistor
output shorted AC wills directly damaged speaker.
• Power supply : 12V.
• PCB dimensions : 2.6” X 1.4” |
|
69 |
EL650 |
מגן רמקולים סטריאו
This
speaker protector circuit is the circuit that can
connect to OCL stereo amplifier since TR output is
directly connected with speaker. Whenever the circuit is
deficient, direct current will demage the speaker.
Specification:
- Supply voltage : 12 VDC
- Consumption : 60mA.max
- Dimension : 3.24 x 1.84 inches. |
|
126 |
EL651 |
סימולאטור סטריאופוני
• The stereo
simulator circuit divides the different frequency to
left and right side.
• The left allows the frequency at 64Hz, 1Khz and 4Khz.
The right lets the frequency at 32Hz, 500 Hz and 2Khz to
go through.
• Power supply : 12V.
• PCB dimensions : 2.7” X 2.7” |
|
130 |
EL652 |
מיקסר 3 ערוצים ( למיקרופון)
• A circuit of
3 channels consist of three microphones mixing out the
same position,
• It can be applied in singing practice or conversation.
• Power supply : 12V.
• PCB dimensions : 2.0” X 2.2” |
|
106 |
EL653 |
מגבר למגפון מונו
• This loudness circuit, it
is circuit increases base and twitter.
• Normal loudness is connected with volume by connecting
at volume tap and adding switch as a loudness adjuster
but it would not much increase the sound.
• This circuit has 3 frequency filters to increase base
and twitter.
• Power supply : 12V.
• PCB dimensions : 2.3” X 1.8” |
|
43 |
EL654 |
מגבר למגפון סטריאו
• This loudness
circuit, it is circuit increases base and twitter.
• Normal loudness is connected with volume by connecting
at volume tap and adding switch as a loudness adjuster
but it would not much increase the sound.
• This circuit has 3 frequency filters to increase base
and twitter.
• Power supply : 12V.
• PCB dimensions : 2.3” X 1.8” |
|
85 |
EL655 |
מגבר אות וידאו 1-4 ערוצים
• This circuit
may be used to amplifier the video signal.
• The circuit has a input and four outputs.
• Adjustable gain: approx. 1-4 dB. Input and output
impedance: 75 ohms.
• Operating voltage: 12VDC.
• PCB dimensions : 3.0” X 2.2” |
|
130 |
EL656 |
מגברOTL 30W R1%
• This
amplifier circuit contains only main amplifier.
• There is no tone and control.
• The circuit is OTL so no problem regarding burning
speaker concern when output of transistor is shorted.
• This circuit needs 40 – 50V.
• Power supply : 31-0-31 or 33-0-33V.
• 1.5A. transformer
• PCB dimensions : 4.7” X 1.8” |
|
145 |
EL657 |
מגברOTL 30W. R1% סטריאו
• This
amplifier circuit contains only main amplifier.
• There is no tone and control.
• The circuit is OTL so no problem regarding burning
speaker concern when output of transistor is shorted.
• This circuit needs 40 – 50V.
• Power supply : 31-0-31 or 33-0-33V.
• 3A. transformer
• PCB dimensions : 4.7” X 1.8” |
|
280 |
EL658 |
מגברOCL 35W R1% מונו
• This circuit
is the main amplifier circuit with input sensitivity 1
volt, and input impedance 15K, with complementary class
AB circuit type.
• Power supply : Dual 35VDC.
• Can be used for super tone control circuit.
• PCB dimensions : 4.9” X 2.4” |
|
157 |
EL659 |
מגברOCL 35W R1% סטריאו
• This circuit
is the main amplifier circuit with input sensitivity 1V.
and input impedence 15K, with complementary class AB
circuit type.
• It can be used for super tone control circuit.
• Power supply : Dual 35VDC.
• PCB dimensions : 4.9” X 2.4” |
|
290 |
EL660 |
מגברOCL 50W R1% מונו
• This power
amplifier 50 watt circuit is the main amplifier circuit
with input sensitivity 1 volt, and input impedance 15K,
with complementary class AB circuit type.
• Power supply : 24-0-24V.
• PCB dimensions : 4.5” X 1.8” |
|
196 |
EL661 |
מגברOCL 50W R1% סטריאו
• This power
amplifier circuit is a complementary class AB, main
amplifier stereo which has the input speet at a volt and
input impedance at 15K.
• Power supply : 24-0-24V.
• PCB dimensions : 4.5” X 1.8” |
|
382 |
EL666 |
מגברOCL 100W. R1% מונו
• This circuit
is the main amplifier circuit with input sensitivity
1Vrms, input impedence 20Kohms.
• Frequency response 10 to 100 KHz. (+/- 1dB), and total
harmonic distortion 0.02 %
• Using a circuit the end stage is always set to class
AB.
• Power supply : Dual 50 VDC.
• PCB dimensions : 6.0” X 2.4” |
|
266 |
EL667 |
מגברOCL 100W. R1% סטריאו
• This circuit
is the main amplifier circuit with input sensitivity
1Vrms, input impedence 20Kohms.
• Frequency response 10 to 100 KHz. (+/- 1dB), and total
harmonic distortion 0.02 %
• Using a circuit the end stage is always set to class
AB.
• Power supply : Dual 50 VDC.
• PCB dimensions : 6.0” X 2.4” |
|
598 |
EL671 |
מגבר סאב וופר 48W
SUB WOOFER
AMPLIFIER (48W. OCL.)
• This circuit
is the main amplifier circuit for low frequency with
bandwidth frequency : 25 to 200 Hz.
• Input sensitivity : 1 Vrms. , Input impedance : 100
Kohms, And Output power : 48 Wrms class AB in 4 or 8
Ohm.
• Power supply : +/- 35VDC.
• PCB dimensions : 4.6” X 2.5” |
|
173 |
EL672 |
מיני מגפון 2W
- This circuit
is a small amplifier which include preamplifier,
condensor microphone and a loudspeaker.
It is easy using and installation. Ideal as in class,
meeting room etc.
- Power supply : 4.5-12VDC.
- Consumption : 300mA max. @ 12VDC.
- Output power : 2W.max. (using a loudspeaker 8W
2W/power supply 12V/1.5A. max.)
- Adjustable level sound by potentiometer.
- S/N ratio : 80dB (A weighted)
- Frequency response : 20Hz to 20kHz (-3dB)
- PCB dimensions : 2.34 x 1.42 inches |
|
80 |
EL673 |
מיני מגבר 1W
סטריאו
MINI POWER
AMP 1+1W. STEREO
- This circuit is a small amplifier.
- It is easy using, building and installation.
- It is suitable for radio, video, computer etc.
- power supply : 3-12VDC.
- consumption : 500mA max. @ 9VDC. (using a loud-
speaker 8Ω 1Wx2)
- output power : 1+1W.max. stereo
- adjust. level sound by trimmer potentiometer.
- S/N ratio : 70dB (A weighted)
- sensitivity (1kHz/500mW) : 120mVeff
- PCB dimensions : 2.16 x 1.36 inches.
- Recommended Housing : EL17 |
|
69 |
EL674 |
מיני מגבר 2W
עם רמקולים - מונו
POWER AMP
2 W. MONO (WITH SPEAKER)
- This power amplifier
circuit is the small amplifying circuit that suitable
for sound a bout signal amplifying but the sound is not
clear, means input signal is too strong
- power supply : 9- 12VDC.
- consumption : 300mA. max. (8 Ωloudspeaker, 0.25W
@12VDC).
- output power : 2W. max. (8 Ωloudspeaker, 2W@ 12VDC,
1.5A. max.)
- adjust. level sound by trimmer potentiometer.
- S/ N ratio : 80dB (A weighted)
- frequency response : 20Hz to 20kHz (- 3dB)
- PCB dimensions : 1.62 x 1.42 inches.
12VDC
- Recommend Housing : EL17 |
|
80 |
EL675 |
מגבר 2W עם רמקולים סטריאו
POWER AMP 2+ 2 W
STEREO (WITH SPEAKER)
This power amplifier circuit is the small
amplifying circuit that suitable for sound a bout signal
amplifying
- power supply : 9- 12VDC.
- consumption : 600mA. max. (8 Ωloudspeaker, 0.25W
12VDC, 3A. max.)
- adjust. level sound by trimmer potentiometer.
- S/ N ratio : 80dB (A weighted)
- frequency response : 20Hz to 20kHz (- 3dB)
- PCB dimensions : 2.22 x 1.89 inches.
- Recommend Housing : EL03 |
|
127 |
EL676 |
מגבר שמע לטלפון
• A small
amplifier circuit that used for amplifying signal from
various noise sources and sending out through earphones
for a clearer sound.
• Power supply: 3 VDC,
• Consumption: 60 mA. max.
• Output power: 1+1 W. max. stereo.
• Adjust sound level with trimmer potentiometer.
• S/N ratio: 70 dB (A weighted)
• Sensitivity (1 kHz/500 mW): 120 mV. eff.
• PCB dimensions: 2.24 x 1.34 in.
• Recommended housing: Future Box (EL03) |
|
69 |
|
|
|
|
|
|
|
|
|
|
|
|