מק"ט |
תאור |
תמונה |
עלות
יח'
בש"ח לכמות
עד
10
יח' |
elR002 |
טיימר רילאי
ניתן לתכנות
DC 12V 10A Multifunction
Self-lock Relay Cycle Timer Module
PLC Home Automation Delay Module |
|
150 |
elR001 |
טיימר רילאי
12V 10A
off-delay relay module / delay
switch / Robot / Smart car
accessories essential DIY |
|
120 |
elR003 |
טיימר סויטצ
דיגיטאלי, ניתן לתכנות שבועי
DC 12V 16A Mini LCD Digital Power Programmable
Control Timer Switch Time Relay |
|
160 |
|
|
|
|
EL401 |
סוויטצ' תאורה ( אור סוגר מעגל ON)
• Electronic circuit that using LDR to
receive light in order to control the relay for on-off
the electric home appliances.
• Power supply : 12V.
• Recommended housing : EL03
• PCB dimensions : 2.7” X 1.4” |
|
80 |
EL402 |
שלט מרחוק
למכשירים חשמליים באמצעות אור
• A remote control by the light of a
flashing will control the on-off functions of electrical
appliance through a light dependent sensibility-
adjustable resistor.
• LED indicator is also provided.
• Power supply : 12V.
• Recommended housing : EL04
• PCB dimensions : 3.2” X 1.6” |
|
92 |
EL403 |
סוויטצ לילה (
בחשיכה ON)
• Night
activate switch circuit is an electronic circuit that
control gate light to be swithched on at night and off
during daytime.
• This circuit can save electricity cost because it
Automatically switches on and off.
• Power supply : 12V.
• Recommended housing : EL03
• PCB dimensions : 2.3” X 1.3” |
|
80 |
EL404 |
סוויטצ אוטומט
לילה 220V
• The circuit
can make human more convenient by automatically
switching on the moon light at night and switching off
in the morning.
• This circuit is suitable for front gate light.
• Easily installing by using small amount of alternating
current (A/C 220V.) only.
• Power supply : 220V.
• Recommended housing : EL03
• PCB dimensions : 2.5” X 1.7” |
|
92 |
EL405 |
סוויטצ
מגע ON/OFF
• A circuit
capable of opening or closing by touching its contacts.
• Able to reverse the operation modes according to our
requirement.
• Power supply : 12V.
• Recommended housing : EL04
• PCB dimensions : 3.2” X 1.6” |
|
92 |
EL406 |
טיימר סוויטצ 0-3 שעות
• The timer switch device
can be connected to an appliance which is 220 volt and
not more than 300 watt, to set its turning off time from
0-3 hours related to adjustment of the volume.
• Power supply : 12V.
• Recommended housing : EL10
• PCB dimensions : 3.0” X 1.8” |
|
104 |
EL407 |
טיימר סוויטצ
15 דקות עד 10 שעות
• The timer
switch circuit is used for turning off an appliance as
its time is set, from 15 minutes up to 10 hours.
• Power supply : 12V.
• Recommended housing : EL04
• PCB dimensions : 2.8” X 3.2” |
|
115 |
EL408 |
סוויטצ קול (ON
VOICE AC )
• A sensitivity
adjustable switch that can be activated by sound and
capable of 1-60 second delay.
• Power supply : 12V.
• Recommended housing : EL10
• PCB dimensions : 2.6” X 2.3” |
|
92 |
EL409 |
בקר
לשליטה מרחוק ע"י קול
• Another
interesting remote control switch that rely on any kind
of sound such as hand-clapping to activate the circuit
through relays.
• Power supply : 12V.
• Recommended housing : EL04
• PCB dimensions : 3.3” X 1.5” |
|
92 |
EL410 |
* אינפרא ראד
לשליטה מרחוק, ערוץ אחד 10 מטר
• This infrared
remote ciecuit can be easily used for electrical home
appliances controlling.
• It devices into 2 parts which are 9 volt transmitter
and 9 volt receiver.
• The receiving part incharges for less than 300W
electrical home appliances controlling.
• Power supply : 12V.
• Recommended housing : EL16 for RX (receiver), EL17 for
TX (transmitter)
• PCB dimensions : 3.7” X ” 1.7” for RX (receiver), 2.0”
X 1.3” for TX (transmitter) |
|
207 |
EL411 |
* אינפרא ראד
לשליטה מרחוק, ערוץ אחד 25 מטר
• This
tranceiver infrared remote circuit is an efficiency
standard remote circuit that can detect for both day
night for any places.
• It comprises of 2 major sections
• Power supply : 12V.
• Recommended housing : EL16 for RX (receiver), EL17 for
TX (transmitter)
• PCB dimensions : 3.7” X ” 1.7” for RX (receiver), 2.0”
X 1.3” for TX (transmitter) |
|
220 |
EL412 |
* אינפרא ראד
לשליטה מרחוק, 2 ערוצים
35 מטר
• This infrared
remote circuit can be easily used for 2 electrical home
appliances (300W maximum) controlling independently.
• Power supply : 12V.
• Recommended housing : EL10 for RX (receiver), EL17 for
TX (transmitter)
• PCB dimensions : 4.1” X 2.1” for RX (receiver) , 1.6”
X 2.8” for TX (transmitter |
|
290 |
EL415 |
דימר 500W
• This circuit
is a dimmer circuit with triac that is considered as the
easiest circuit.
• It has only few components and is applied for
adjusting light bulb, electrical stove or pan.
• It can control those electrical equipments for maximum
500 watt.
• Power supply : 220V.
• Recommended housing : EL14
• PCB dimensions : 1.7” X 1.5” |
|
59 |
EL416 |
דימר 1000W
The light dimmer is an electronic device
used for dimming or adjusting light of electric bulbs
and heat of stoves or electric pans. Its maximum
capability is to be used with electrical appliances up
to 1000 watts.
Technical specifications:
- voltage supply: 220-240VAC.
- maximum load: 1000 watts @ 220VAC
- dimming adj. by potentiometer
- PCB dimensions : 1.01 x 1.46 inches. |
|
80 |
EL418 |
דימר 2500W
• The light
dimmer is an electronic device used for dimming or
adjusting light of electric bulbs and heat of stoves or
electric pans.
• Its maximum capability is to be used with an
electrical appliances up to 2500 watt.
• Power supply : 220V.
• Recommended housing : EL10
• PCB dimensions : 3.3” X 2.9” |
|
185 |
EL420 |
ספק מתח למנוע AC
1000W
• An electronic circuit
suitable for speed control of electronic fan.
• It can control those electrical equipment for maximum
1000W.
• Power supply : 220V.
• Recommended housing : EL20
• PCB dimensions : 2.1” X 1.5” |
|
86 |
EL422 |
מפסק אלקטרוני מקודד
• The circuit
is a 10-key 4-digit coding for up to 10,000 combinations
for maximum security.
• Power supply : 12V.
• Recommended housing : EL16
• PCB dimensions : 2.7” X 2.8” |
|
92 |
EL423 |
ממסר שליטה מיוצב
This solid
state relay doesn’t rely on the contacts so the working
life last longer.
• Power supply : 220V.
• Recommended housing : EL03
• PCB dimensions : 2.1” X 1.5” |
|
92 |
EL425 |
בקר
שליטה למפלס מים
• An electronic
circuit that will constantly monitor the water level in
a container.
• Both maximum and minimum levels are adjustable.
• Power supply : 12V.
• Recommended housing : EL03
• PCB dimensions : 2.5” X 1.6” |
|
104 |
EL432 |
סוויטצ 0-180 דקות כיבוי
והדלקה
Able to control
the on-off function freely from 1 to 180 minutes
• With 200 watt maximum electrical home appliances.
• Power supply : 12V.
• Recommended housing : EL04
• PCB dimensions : 3.0” X 1.9” |
|
115 |
EL433 |
מולטי טיימר
סוויטצ 0 - 180 דקות
• The multi
function timer switch can be applied as an automatic
turning on-off switch.
• A time period can be pre-selected from 2-180 minutes.
• Power supply : 12V.
• Recommended housing : EL04
• PCB dimensions : 3.7” X 1.8” |
|
115 |
EL436 |
שלט רחוק
UHF ערוץ אחד
- This circuit is a control circuit which
uses UHF frequency is carrier for control receiver
circuit.
- The operation is divided into two functions, causing
suitable for multipurpose
- power supply : 9VDC. (TX), 12VDC. (RX)
- consumption : 21mA (TX), 58mA (RX)
- frequency : approx. 400MHz
- distance TX/RX : 20m (65') (clearing)
- relay output : 220VAC./5A max.
- PCB dimensions : 1.93 x 1.24 inches. (TX) 3.35 x 1.84
inches. (RX)
- Recommended Housing : EL01(TX) and EL17(RX) |
|
150 |
EL437 |
חיישן קירבה
A proximity sensor switch
circuit that used as a detective
circuit. The circuit working is based on the reflection
of an
infrared hitting the object and reflecting back to the
receiver.
It is good for checking and detecting
any approaching objects.
Technical specifications:
- Power supply : 12VDC.
- Consumption : 100mA. max.
- Detecting distance : 5-30 cm. (approx.)
- Time working delay : 0-10 sec.
- Loading : max. 5A./220VAC.
- PCB dimensions : 3.84 x 2.01 in. |
|
94 |
EL438 |
חיישן מפלס מים עם אזעקה
This is a warning and
water pump level control circuit for checking water
level and control the water pump automatically. Besides
it has a alarm sound when the water is full or lose. It
can be used for for application such as a small water
pump, an alarm sound of water level, etc.
- Power supply : 12VDC.
- Consumption : max. 150mA.(working), max.
11mA.(Standby).
- Can be set the operation of relay and alarm sound when
the water in tank is full or lose.
- Loading : 1A.
- PCB dimensions : 2.64 x 1.87 in. |
|
115 |
EL439 |
תאורת חרום 21 לדים
This is a energy-saving
LED lamp. It is the same as a flashlight. A good thing
of this circuit is selecting two power supply as 12VDC
or 220VAC. It can be used for application such as a
small lamp, a lamp of emergency light, etc.
Technical Specifications:
- Poer supply : 12VDC or 220-240VAC (select by
jumper).
- Consumption : max. 155mA. at 12VDC.
- Display : 21 LEDs.
- PCB dimensions : 3.27 x 2.27 in. |
|
95 |
EL440 |
שלט אינפרא ראד ערוץ אחד
This infrared remote
control is controllong the electric equipment with
infrared remote control. It can be used for application
such as lamp, fan, etc.
Technical Specifications:
- Power supply : 12VDC (RX) and 3VDC (TX)
- Consumption : max. 42mA. (RX)
- Consumption of standby : max. 9mA. (RX)
- Can be set the button of transmitter by yourself.
- Can be set the operation of relay to be push-on
push-off switch or push switch.
- Loading : 1A.
- PCB dimensions : 1.75 x 2.41 in. |
|
196 |
EL441 |
רסיבר לשלט אינפרא ראד ערוץ אחד
This infrared remote
control is controlling the electric equipment with
infrared remote control. It can be used for application
such as lamp, fan, etc.
Technical Specifications:
- Power supply : 12VDC
- Consumption : max. 42mA.
- Consumption of standby : max. 9mA.
- Loading : 1A.
- PCB dimensions : 1.75 x 2.41 in. |
|
138 |
EL442 |
שלט אינפרא ראד 5 ערוצים
This infrared remote
control is controllong the electric equipment with
infrared remote control. It can be used for application
such as lamp, fan, etc.
Technical Specifications:
- Power supply : 12VDC (RX) and 3VDC (TX)
- Consumption : max. 190mA. (RX)
- Consumption of standby : max. 9mA. (RX)
- Can be set the button of transmitter by yourself.
- Can be set the operation of relay to be push-on
push-off switch or push switch.
- Loading : 1A. per channel
- PCB dimensions : 3.66 x 2.88 in |
|
254 |
EL443 |
רסיבר לשלט אינפרא ראד 5 ערוצים
This infrared remote
control is controllong the electric equipment with
infrared remote control. It can be used for application
such as lamp, fan, etc.
Technical Specifications:
- Power supply : 12VDC (RX) and 3VDC (TX)
- Consumption : max. 190mA. (RX)
- Consumption of standby : max. 9mA. (RX)
- Loading : 1A. per channel
- PCB dimensions : 3.66 x 2.88 in |
|
428 |
EL444 |
מולטי טיימר סוויטצ דיגיטלי -- משניה
עד 99 שעות
DIGITAL MULTIFUNCTION
TIMER SWITCH 1 SEC - 99 HOURS
Power supply : 12VDC
- Consumption : max. 90mA.
- Time setting range : 1 second - 99 hours.
- Adjustable pattern range : timer on, timer off,
alternative on-off timer and
automatic timer on-off.
- Loading : 1A. max.
- PCB dimensions : 3.57 x 2.40 in. |
|
420 |