הנחות  מיוחדות  לקניות  מרוכזות  ומוסדות  חינוך

עלות יח' בש"ח  לכמות

 עד

 10 יח'

ממשק הקלטת שיחות טלפון אוטומטי

• Automatically records whenever phone is picked up.
• It can be applied for every telephone model including PABX (Private Automatic Branch Exchange).
• Power supply : 9, 12V.
• Recommended housing : EL03
• PCB dimensions : 2.8” X 1.6”

מגבר שמע לשיחות טלפון ( לכבדי שמיעה )

• Connected parallel to the telephone lines needed when there are more than one telephone speaker or in case interception on the phone.
• It comes with a speaker of 2 inch up.
• Power supply : 9V.
• Recommended housing : EL03
• PCB dimensions : 2.21” X 2.2”

מוזיקת המתנה לשלוחת לטלפון

• Can be applied for homes or offices that require all telephone sets to ring.
• Power supply : 6-9V.
• Recommended housing : EL04
• PCB dimensions : 2.2 X 1.9

מגבר עוצמת צלצול טלפון 10W ( לכבדי שמיעה )

• Suitable for home use or office that wants the phone rings more than 1 telephone set at the same time.
• Power supply : 12V.
• Recommended housing : EL04
• PCB dimensions : 2.1” X 1.8”

מגבר שיחות טלפון קטן ( לכבדי שמיעה )

• This circuit is a kind of small amplifier circuit.
• This single ended expansion gives the clear signal .
• Signal will be presented at speaker output .
• With power consumption of only 3V. This circuit will be able to provide a clear sound.
• The circuit also contains variable resistance for signal adjustment.
• Recommended housing : EL17
• PCB dimensions : 1.6” X 1.1”

סמן לד למצב טלפון בשימוש

• A LED display circuit with lighting on whenever phone is picked up.
• Power supply: 3 VDC.
• Consumption: 10 mA.
• PCB dimensions: 1.51x0.91 in.
• Recommended housing: Future Box (EL17)

מוזיקת למצב המתנה בטלפון

This circuit is easy to use. When hold the telephone line, there is the music in the telephone line. It can be used the local line and the telephone exchange.
Technical specifications:
- no need power supply.
- PCB dimensions : 1.88 x 1.63 inches.

מיני טלפון

• A receiving telephone circuit that suits those who want to learn about the telephone operation.
• Power supply: Not required.
• PCB dimensions: 2.59 x 1.72 in.
• Recommended housing: Future Box (EL03)

תחנת אינטרקום דואלית

• Very useful device for large households with several rooms or between floors.
• With a microphone which is connected to a loudspeaker to another room.
• Power supply : 4.5 V.
• Recommended housing : EL04
• PCB dimensions : 2.5” X 2.0”

סמן לטלפון תפוס

• Using LED to display the result by lighting on when the phone is picked up.
• Without having rely on its power supply.
• Recommended housing : EL11
• PCB dimensions : 0.8” X 0.8”

שומר על פרטיות בשיחות טלפון מונע ציטוט

• Suitable for home or official telephone line which has many telephone with the same phone number.
• Whenever 1 set of telephone is used or firstly picked up, the circuit will automatically cutting other lines off and circuit will be used till the connected line free.
• Without having rely on its power supply.
• Recommended housing : EL01
• PCB dimensions : 2.0” X 1.7”

משדר fm לשיחות טלפון 

• Using radio frequency 90 mHz FM transmission.
• Without having rely on its power supply.
• Recommended housing : EL01
• PCB dimensions : 1.9” X 1.1”

מדליק נורה בעת קבלת שיחת טלפון ( מתאים לחרשים/כבדי שמיעה ) 500W

• This circuit is suitable for high disturbance.
• If having the phone call, the light will display at the same rhythm of ringing bell.
• Power supply : 220V.
• Recommended housing : EL03
• PCB dimensions : 2.1” X 2.3”

טיימר מנתק שיחות טלפון מ 1 עד 20 דקות

• This circuit will cut the phone line immediately after prior warning for 2 seconds.
• After warning ,if do not put the line down within 20 seconds, the circuit will cut the line off and cannot use the line again within 10 seconds.
• Without having rely on its power supply.
• Recommended housing : EL17
• PCB dimensions : 3.7” X 2.2”

מגן מפני ציתות לטלפון

• This circuit is protection from connected parallel to the telephone line.
• The circuit is generated the tone to annoyance the signal telephone causing the telephone is not used.
• LED indication when have to act under cover the telephone is used.
• No need the Power supply.
• Recommended housing : EL03
• PCB dimensions : 2.5” X 2.1”

טלפון ניסיוני

• This circuit is designed for traning board which suitable to learn the operation of telephone.
• The circuit can be set the dialing mode to tone system or pulse system.
• Line out point is used for connec the telephone.
• The circuit is no need the power supply.
• Recommended housing : EL09
• PCB dimensions : 4.9” X 4.1”

מאיר בעת קבלת צלצול 5 לדים  מומלץ

- This ringing signal light circuit is alarm light when has the ringing signal into telephone.
- It is suitable for the silent place, hospital etc.
- It is a small side and no need power supply, causing easy for installing and using.
Technical specifications:
- No need power supply
- Display : 5 LED's super bright
- This circuit is connected parallel with the telephone line.
- PCB dimensions : 1.38 x 2.13 inch

אינטרקום דואלי ופעמון כניסה

- This circuit device is a mini communication tool, well khown to be used at home, with a microphone which is connected to a loudspeaker to another room.
Technical specifications:
- power supply : 6-12VDC.
- consumption : 40mA (talking), 182mA (push SW tone)
- there is the calling tone.
- max. length of shielded cable : 50m.
- PCB dimensions : 2.73 x 2.03 inches. (big board) 1.15 x 0.76 inches. (small board)
- Recommended Housing : EL01 for small board and EL03 for big borad

אינטרקום דואלי - משדר

• A mini dual station intercom that is recommended to be used at home.
• Two loudspeakers of 8 Ohm 0.25 W are provided.
• Station selection: By sliding switch.
• Power supply: 4.5-6 VDC.
• Consumption: 8 mA max. (standby) @ 4.5 VDC
50 mA max. (working) @ 4.5 VDC
• PCB dimensions: 1.95 x 1.31 in.
• Recommended housing: Future Box (EL03)